jt2at86f1l00***** VIN lookup for 1990 TOYOTA CELICA (jt2at86f1l0009888)
jt2at86f1l0009888 VIN is assigned
to 1990 TOYOTA CELICA with a .
It is a PASSENGER CAR .
It was manufactured by TOYOTA MOTOR CORPORATION.
This 1990 CELICA is a
Coupe.
| Vehicle Descriptor | JT2AT86F*L0 |
| Make | TOYOTA |
| Manufacturer Name | TOYOTA MOTOR CORPORATION |
| Model | Celica |
| Model Year | 1990 |
| Plant City | TAHARA |
| Series | ST |
| Vehicle Type | PASSENGER CAR |
| Plant Country | JAPAN |
| Plant Company Name | Toyota Motor Corporation - Tahara Plant |
| Plant State | AICHI |
| body Image Id | 3 |
| Body Class | Coupe |
| Doors | 2 |
| Bed Type | Not Applicable |
| Cab Type | Not Applicable |
| Trailer Type Connection | Not Applicable |
| Trailer Body Type | Not Applicable |
| Drive Type | 4x2 |
| Engine Numberof Cylinders | 4 |
| Displacement(CC) | 1587 |
| Displacement(CI) | 96.844681878 |
| Displacement(L) | 1.6 |
| Engine Model | 4A-FE |
| Fuel Type- Primary | Gasoline |
| Valve Train Design | Dual Overhead Cam (DOHC) |
| Engine Configuration | In-Line |
| Other Engine Info | Electronic Fuel Injection or Cabureted Engine |
| Engine Manufacturer | Toyota |
| Seat Belt Type | Manual |
| Front Air Bag Locations | Driver Seat Only |
| NCSA Body Type | 2-door sedan,hardtop,coupe |
| NCSA Make | Toyota |
| NCSA Model | Celica |
| Bus Floor Configuration Type | Not Applicable |
| Bus Type | Not Applicable |
| Custom Motorcycle Type | Not Applicable |
| Motorcycle Suspension Type | Not Applicable |
| Motorcycle Chassis Type | Not Applicable |
Driver Complaints
Recalls
April 20 , 1990 NHTSA Campaign Number: 90V078000
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
IN AN ACCIDENT, THE AIR BAG MAY NOT DEPLOY, WHICH COULD RESULT IN INCREASED INJURY TO THE DRIVER.
Manufacturer: TOYOTA MOTOR CO., LTD.
Components: AIR BAGS
Potential Number of Units Affected: 2,543
Description:
AIR BAG INFLATOR CASE WAS INCORRECTLY MACHINED.
Remedy:
REPLACE AIR BAG INFLATOR UNIT.
Notes:
SYSTEM: AIR BAG.VEHICLE DESCRIPTION:PASSENGER CARS.
February 11 , 2010 NHTSA Campaign Number: 10E002000
SUSPENSION
THE ABSENCE OF THE WELD CAN ALLOW THE STRUT TO COME OUT OF ITS MOUNTING POSITION UNDER CERTAIN EXTREME DRIVING CONDITIONS WHICH COULD CAUSE DAMAGE TO SURROUNDING VEHICLE COMPONENTS INCREASING THE RISK OF A CRASH.
Manufacturer: RIDE CONTROL, LLC
Components: SUSPENSION
Potential Number of Units Affected: 12,657
Description:
RIDE CONTROL IS RECALLING CERTAIN FRONT STRUT MOUNTS BRANDED AS GABRIEL RIDE CONTROL OR ARVINMERITOR, P/NOS. 142435, 142193, 142305, 142303, SOLD AS REPLACEMENT EQUIPMENT FOR THE VEHICLES LISTED ABOVE. THE AFFECTED FRONT STRUT MOUNTS DID NOT CONTAIN A WELD JOINT BETWEEN THE BEARING HOUSING AND THE RATE PLATE.
Remedy:
RIDE CONTROL WILL NOTIFY OWNERS OF RECORD AND REPLACE THE AFFECTED PARTS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 15, 2010. OWNERS MAY CONTACT RIDE CONTROL AT 1-248-458-1396.
Notes:
THIS RECALL ONLY PERTAINS TO AFTERMARKET GABRIEL RIDE CONTROL OR ARVINMERITOR FRONT STRUT MOUNTS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON VEHICLES MANUFACTURED BY GENERAL MOTORS, NISSAN, OR TOYOTA.OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV .
Rating:
4.71 from 5
(4291 reviews)